Owl shift. Thu Mar 4, 2004 (190/191)

2004 CDF E-Log -- Owl shift. Thu Mar 4, 2004
SciCo	DAQ Ace	Monitoring Ace	CO	(Operations Manager)
S.Miscetti	S.Sabik	A.Ivanov	B.Mohr	M.Convery

Start of Shift Notes:

Store 3271 in progress. Initial Lum: 1.39E31

Thu Mar 4 00:38:50 earlier today, while the Liunatics were on the fiber splitting we saw massive reformatter errors > 4%. Also now we got one burst of reformatter errors (49 at a time, run 179621). We were discussing the situation and decided that we would like to accumulate more statistics. We will discuss the situation again at ~8am. And come up with a plan befor the next store - Rainer and Burkard

Thu Mar 4 01:03:56 Done timeout for crate B0pcal00. Auto HRR cleared the error, but the the trigger rate dropped to 0. Halted, shepherded B0pcal00 and it's ok now. - Simon :: (run 179621)

Thu Mar 4 01:14:01

CPR NW trip. 
Turned HV back on.

- Andrew

Thu Mar 4 01:39:49

- 23:30-1:30 status plots - Andrew

Thu Mar 4 02:26:43

- 1:30-2:20 status plots - Andrew
-- Thu Mar 4 02:31:15 comment by...Andrew --

Notice we lost ACNET communication for the period about
10 minutes (~2:05-2:15).
RC reported ACNET monitoring failure.
This problem is mentioned in MCR E-log.

Thu Mar 4 03:15:30

- Brian
-- Thu Mar 4 03:21:39 comment by...Brian --

I have not been able to find referene plots for SVXMon after the incident this morning with
layer 4, wedge 4, barrel 1, so I am posting the SVXMon plots as I see them now.


In addition to layer 4, wedge 4, barrel 1, there is a yellow area in cell id: ISL0, barrel 3, wedge
16 & 17.  This cell was yellow last night when we started the JET trigger test, but went away with
HRR. (See silicon e-log for details.)

-- Thu Mar 4 03:27:00 comment by...Brian --

The ISL0 yellow area is now green.  There was some problem with SVXMon display not updating the
ISL slides (note the disagreement in date between ISL slides and SVX slides).  Also, the small bits
of yellow in SVXMon L00 & ISL Chip Status Map are now gone.

Thu Mar 4 03:42:58

- 2:20-3:30 status plots - Andrew

Thu Mar 4 05:04:16 Plan from the run coordinator elog indicates that the store will be terminated within the next hour (when the stack is 150E10 or 0600, whichever comes first). - convery

Thu Mar 4 05:31:35 MCR called. They confirm that beam will be dropped at 6:00 am. Run will be ended 10 min earlier. Silicon experts paged. - S.Miscetti

Thu Mar 4 05:39:24 Done timeout for B0COT11. Shepherd successful. - Simon :: (run 179621)

Thu Mar 4 05:47:44 Run 179621 Terminated at 2004.03.04 05:46:55 - RunControl

Thu Mar 4 05:48:17 Run 179621 TERMINATE: end of store - Simon x2080

Thu Mar 4 05:57:06 COT OFF, TOF+MNP+CLC OFF, rest of detector ad required by end of store conditions. - S.Miscetti

Thu Mar 4 05:58:49

- 3:30 - 5:50 status plots - Andrew

Thu Mar 4 06:01:10 Run 179621 RUNSTATUS:

Marked Bad, explanation:
COT OFF

- cdfscico

Thu Mar 4 06:15:36 Run 179622 ACTIVATE: CAL QIE Calibration for CCAL crates - Simon x2080

Thu Mar 4 06:15:37 Silicon experts are in, Front End Calo experts paged. Waiting up to 6:45 to call L2 expert (Burkard). - S.Miscetti
-- Thu Mar 4 06:23:14 comment by...m mattson --
Woke up to the pleasant sounds of the pager. I talked the DAQ Ace through the procedure for doing a Cal QIE calibration and FRAM download of the CCAL crates. The error log does not show any unusual problems, so I think the calibration is good. For the next 10 minutes or so, the CCAL crates will be red in VxWorks, as they download the constants.
-- Thu Mar 4 06:28:45 comment by...m mattson --
The other day, Bill B had to use the QIETEST program to reconfigure ccal05. When this is done, RC complains that all ADMEMs in ccal05 are "not configured", because the tags are not the same as the last "official" calibration. We are taking care of that now.

Thu Mar 4 06:28:45 Run 179622 TERMINATE: CAL QIE Calibration for CCAL crates - Simon x2080

Thu Mar 4 06:31:19 Run 179623 ACTIVATE: CAL QIE calib - Simon x2080
-- Thu Mar 4 06:37:22 comment by...m mattson --
Although the CO still needs to check DBANA, I looked at the comments in the error log. There appear to be no unusual messages. The only failure that stands out is b0pcal05, slot 21, channel 01, which has a wide RMS. Pcal odd slots, channels 00 and 01 are PIN diode channels, which are not used during data taking. No action needs to be taken for this. (I'm guessing that it may be a consequence of the plug laser runs that were done the other day.)

Thu Mar 4 06:32:50 Run 179623 TERMINATE: CAL QIE calib - Simon x2080

Thu Mar 4 06:32:51 Run 179624 ACTIVATE: CLC QIE calib - Simon x2080

Thu Mar 4 06:37:20 Run 179624 TERMINATE: CLC QIE calib - Simon x2080

Thu Mar 4 06:37:21 Run 179625 ACTIVATE: BSC QIE calib - Simon x2080

Thu Mar 4 06:37:22 Run 179625 TERMINATE: BSC QIE calib - Simon x2080

Thu Mar 4 06:40:21 Run 179626 ACTIVATE: TOF QIE calib - Simon x2080

Thu Mar 4 06:40:22 Run 179626 TERMINATE: TOF QIE calib - Simon x2080

Thu Mar 4 06:43:36 Run 179627 ACTIVATE: SMX QIE calib - Simon x2080

Thu Mar 4 06:43:37 Run 179627 TERMINATE: SMX QIE calib - Simon x2080

Thu Mar 4 06:44:45 Run 179628 ACTIVATE: CEM LED calib - Simon x2080

Thu Mar 4 06:47:00 Run 179628 TERMINATE: CEM LED calib - Simon x2080

Thu Mar 4 06:47:40 Run 179629 TERMINATE: COT calib - Simon x2080

Thu Mar 4 06:47:43 Run 179629 ACTIVATE: COT calib - Simon x2080

Thu Mar 4 06:49:24 Run 179630 ACTIVATE: Muon calib - Simon x2080

Thu Mar 4 06:49:56 Run 179630 TERMINATE: Muon calib - Simon x2080

Thu Mar 4 06:52:44 Run 179631 ACTIVATE: TOF TAC calib - Simon x2080

Thu Mar 4 06:53:23 Run 179631 TERMINATE: TOF TAC calib - Simon x2080

Thu Mar 4 06:57:37 Run 179632 Activated at 2004.03.04 06:57:29 - RunControl

Thu Mar 4 06:59:00 Run 179632 ACTIVATE: COSMIC NOTSILICON NOTAPE [12,391,403] - Simon x2080

Thu Mar 4 07:02:52 ICICLE heart beat not heard for a while. Restarted it. - Simon

Thu Mar 4 07:08:15 They are starting shot setup; silicon experts advised. - S.Miscetti

Thu Mar 4 07:24:53

- Brian
-- Thu Mar 4 07:27:21 comment by...Brian --

New bad channels in CALQIE calibration (blue).  None of the channels had pedestals or slopes
severe enough to call an expert (according to directions on web).  Shot setup started, so we will
not repeat calibration.


All other calibrations look OK.

Thu Mar 4 07:48:30 Run 179632 Terminated at 2004.03.04 07:48:02 - RunControl

Thu Mar 4 07:48:31 Run 179632 TERMINATE: ended run requested by expert. - Simon x2080

Thu Mar 4 07:55:22

Run Number	Data Type	Physics Table	Begin Time	End Time	Live Time	L1 Accepts	L2 Accepts	L3 Accepts	Live Lumi, nb-1	GR	SC	RC
179621 x2BDA5	BEAM	JET_ST3_DECOUPLED [1,433,403]	23:25:00	05:46:55	06:11:44	221,027,446	1,949,321	1,949,268	282.429	0	1	1
Totals				07:55:01	06:11:44	221,027,446	1,949,321	1,949,268	282.429

- End of Shift Report

Thu Mar 4 07:58:34 Run 179633 Activated at 2004.03.04 07:56:49 - RunControl

Thu Mar 4 07:58:35 Run 179633 ACTIVATE: special run for muon split: MB(01) split MB(03) split - Simon x2080
-- Thu Mar 4 08:00:14 comment by...Burkard -- purple splitter, mu4 on 01, mu5 on 03

Thu Mar 4 07:58:35

Store 3271 (Lum 1.39E31) and run 179621 in progress. 

- Data taken with JET_ST3_DECOUPLED[1,433,403] Si ON, COT OFF 
- Acnet comunications lost for 10-15' around 2:15 am. 
- Store 3271 ended at 6:00. Silicon experts called. 

Reformatted error for run 179621 concentrated only at the  
beginning of the shift: 49 at a time. No more for the rest 
of the run. 

Calibration during stores done: QIE Calibration checked by  
FEE expert. Still, comparing files a list of bad pedestals  
appear on WHA. 

- Shot setup in progress.

- S.Miscetti :: (run 179621)

Thu Mar 4 08:00:56 Run 179633 Terminated at 2004.03.04 08:00:47 - RunControl

Thu Mar 4 08:01:01 Shift Summary:

Trying again.

End of Shift Numbers

CDF Run II

Runs                   179261
Delivered Luminosity   264  
Acquired Luminosity    252  
Efficiency             96

- S.Miscetti

Thu Mar 4 08:02:22 Run 179633 TERMINATE: request by expert. - Tom x2080

Thu Mar 4 08:03:04 Run 179634 Activated at 2004.03.04 08:02:57 - RunControl

Thu Mar 4 08:05:07 Run 179634 ACTIVATE: special run for muon split: swap fibers - Tom x2080

Thu Mar 4 08:09:33 Run 179634 Terminated at 2004.03.04 08:08:40 - RunControl

Thu Mar 4 08:09:35 Run 179634 TERMINATE: ended run run reqeust by expert. - Tom x2080

Thu Mar 4 08:11:20 Run 179635 Activated at 2004.03.04 08:11:07 - RunControl

Thu Mar 4 08:12:50 Run 179635 ACTIVATE: muon splitter special run: don't swap (more statistic) - Tom x2080