2004 CDF E-Log -- Owl shift. Wed Feb 25, 2004
SciCo DAQ Ace Monitoring Ace CO (Operations Manager)
Guram Chlachidze Andrew Ivanov Ian Vollrath Oleg Poukhov J.J.Schmidt


Start of Shift Notes:  

Take over store 3254 at L=12.8*E30. 
We are taking data w/o silicon, with HV turned off on one  
BMU East sector and with bad ADMEM card for wedge 6 of the  
PEM East.
 Wed Feb 25 02:22:42
 - plots (23:55-02:00) --ian
Wed Feb 25 03:37:37 voi alarm on ifix is red. voice scheduler screen is present. this problem is a known unknown. - ian
Wed Feb 25 03:45:09
 - plots (02:00-03:30) --ian
Wed Feb 25 05:25:06
 - plots (03:30-05:00) --ian
Wed Feb 25 06:02:04 
Talked to MCR, he confirmed that end of store studies will start 
at 6:00am. We agreed to continue data taking till 06:15am, then  
MCR can say when we should expect beam losses.
 - Guram
Wed Feb 25 06:19:03 MCR confirmed that beam bumps are expected by 6:30 a.m. We will stop current run and move to "between store state" at 6:25 a.m. - Guram :: (run 179328)
Wed Feb 25 06:25:24 Run 179328 Terminated at 2004.02.25 06:24:57 - RunControl
Wed Feb 25 06:29:50 Run 179328 TERMINATE: start of store studies - Andrew x2080
Wed Feb 25 06:32:14 
brought HVs to the between store config, except for clc.
 - ian
Wed Feb 25 06:35:53 Run 179329 ACTIVATE: TOF QIE Calibration - Andrew x2080
Wed Feb 25 06:35:54 Run 179329 TERMINATE: TOF QIE Calibration - Andrew x2080
Wed Feb 25 06:36:47
 - plots (05:00-06:30) --ian
Wed Feb 25 06:41:02 Run 179330 ACTIVATE: TOF TAC calibration - Andrew x2080
Wed Feb 25 06:41:03 Run 179328 RUNSTATUS: 
Marked Bad, explanation:
Silicon is off, one sector of the BMU is off, and one wedge of PEM East is out of readout.
PCAL 
IMU 
SVX 
ISL 
L00 
SVT
 - cdfscico
Wed Feb 25 06:41:05 Run 179330 TERMINATE: TOF TAC Calibration - Andrew x2080
Wed Feb 25 06:53:42 Run 179331 ACTIVATE: COT calibration - Andrew x2080
Wed Feb 25 06:53:43 Run 179331 TERMINATE: COT calibration - Andrew x2080
Wed Feb 25 06:58:36 
CES/CPR/CCR HV is off for SMQIE calibrations
 - Andrew
-- Wed Feb 25 07:12:47 comment by...ian --  
calibs done - back to standby
Wed Feb 25 07:03:23 Run 179332 ACTIVATE: SMQIE Calibration - Andrew x2080
Wed Feb 25 07:04:31 Run 179332 TERMINATE: SMQIE Calibration - Andrew x2080
Wed Feb 25 07:06:11 Talked to MCR: they are still going to drop this store at 8:00 a.m. I paged Si primary and SPL (according to instructions on white board). - Guram
Wed Feb 25 07:13:41 
After COT calibration: 

numBad Cells=2 
numBad Cables=2.
 - Oleg :: (run 179331)
Wed Feb 25 07:39:41
 - plots (06:30-07:30) --ian
-- Wed Feb 25 07:40:07 comment by...ian --  
plots during eos studies
Wed Feb 25 07:43:43 Mark Mattson is checking calorimeter crates. - Guram
-- Wed Feb 25 07:58:54 comment by...m mattson --  
The wireless system has been plugged in.
Wed Feb 25 07:51:11
abort gap losses for store 3254.
 - ian
Wed Feb 25 07:55:42
Run Number Data Type Physics Table Begin Time End Time Live Time L1 Accepts L2 Accepts L3 Accepts Live Lumi, nb-1 GR SC RC
179328 x2BC80 BEAM PHYSICS_2_02 [2,424,431] 22:57:10 06:24:57 07:16:21 298,955,949 2,413,395 467,135 311.890 0 1 1
Totals 07:55:02 07:16:21 298,955,949 2,413,395 467,135 311.890
 - End of Shift Report
Wed Feb 25 08:11:16 Run 179333 ACTIVATE: XTRP 2TT test standard trig_x.mcs - anyes
Wed Feb 25 08:11:42 Shift Summary: 
Take over store 3254 at L=12.8*E30. 
taking data w/o silicon, with HV turned off on one BMU East 
sector and with bad ADMEM card for wedge 6 of the PEM East. 

- 03:37 voise alarm on ifix is red. voice scheduler screen is 
  present. 

- 06:19 MCR confirmed that beam bumps are expected by 6:30 a.m. 

- 06:25 run stopped 

- few calibrations: TOF,COT,SMQIE 

- Silicon primary and SPL paged

End of Shift Numbers
CDF Run II 

Runs                   179328
Delivered Luminosity   329.5  
Acquired Luminosity    270.9  
Efficiency             82.2
 - Guram
Wed Feb 25 08:18:11 Run 179334 ACTIVATE: XTRP test using simtrack_cmarino with trig_x.mcs - anyes