Below are boot parameters for an MVME2301 in the main DAQ system on subnet 237 booting from b0vxboot01 or b0vxboot02. Substitute the correct values for your processor in the "inet on ethernet" and "target name" fields.

	MVME2301	MVME2305	MVME2400	MVME5500
boot device :	dc	dc	dc	wancom0
processor number :	0	0	0	0
host name * :	b0vxboot02	b0vxboot02	b0vxboot01	b0vxboot01
file name :	kernel/mv2301/v5_3c/vxWorks	kernel/mv2305/v5_3c/vxWorks	kernel/mv2401/v5_4a/vxWorks	kernel/mv5500/v5_5la/nogigE/vxWorks
* inet on ethernet (e) :	131.225.237.108:ffffff00	131.225.237.220:ffffff00	131.225.237.60:ffffff00	131.225.237.80:ffffff00
inet on backplane (b):
host inet (h) :	131.225.237.20	131.225.237.20	131.225.237.17	131.225.237.17
gateway inet (g) :	131.225.237.200	131.225.237.200	131.225.237.200	131.225.237.200
user (u) :	vxworks	vxworks	vxworks	vxworks
ftp password (pw) :
flags (f) :	0x0	0x0	0x0	0x8
* target name (tn) :	b0wcal00	b0svt00	b0cot00	b0ccal00
startup script (s) :	boot/front-end/startup.cdf	boot/front-end/startup.cdf	boot/front-end/startup.cdf	boot/front-end/startup.5500.cdf
other (o) :

* Normally we divide the VxWorks boot hosts evenly between b0vxboot01 (131.225.237.17) and b0vxboot02 (131.225.237.20) − all node names up to, but not including the characters b0m (in alphanumeric order) use b0vxboot01; node names starting with b0m and later shall use b0vxboot02.

The "startup script" assumes that the kernel + additional CDF libraries are burned in the flash ram.

There should be an entry for the processor in ~vxworks/.rhosts and in ~vxworks/.bashrc files.

If you have trouble, you will save a lot of time by just bringing the processor by the online office area and contacting J. Patrick.

Also, the "disable passwords" flag in the boot parameters will be ignored. Passwords will always be required.